Available in Vinyl, Stylelite, Laminate, Decorative MDF Board and Timber Veneer.
Limited to MAXIMUM of 1200 mm wide.
Clients Material Checklist - Board
- All Board must be MR MDF (HMR will not be manufactured or returned if sent)
- Please clearly mark which side is the face side, and if there is a grain direction
- Height: Multiply the height by 1.4 (e.g. 750mm high door requires 1050mm of material in height)
- Width: Add 100mm to the width with the minimum size being 1200mm, this is to stop warping in our saws
Material:
Finish:
Handle:
Gloss laminates/vinyls attracts 15% surcharge.Polished finish attracts 15% surcharge.
We use Mirotone 30% Matt Acid Cure Lacquer for polishing.
Please download and read the Client's Material Fact Sheet before sending the material to us.
PELMET SURROUND - Tick 1 only of the 2 OPTIONS
NOTE 1: Separate Top & Side pelmets with 1 mm to 2 mm gaps - Not available in Metallic Laminates or Client's Material.
NOTE 2: If Vertical Grain is selected the grain on the Top Pelmet will not match the Tambour Door grain.
SPECIAL INSTRUCTIONS
By submitting this order you agree that you have read and accept the , the and you understand that there is a 24 hour limit
on cancellation or alteration of ALL orders (Size reduction is OK).
This order form is a legal document and the information contained here-in will take precedence over any other document.